Bike Gear Shift:  Gear setting and driving technique are important to get the best mileage from a 150cc bike. Riding the bike in the right gear puts less pressure on the engine and reduces fuel consumption. Here are some tips that will help your bike give great mileage:

1. Selecting the right gear

Avoid high gears at low speeds: If you ride the bike in high gear at low speeds, it puts more pressure on the engine and increases fuel consumption. For example, stay in 3rd gear at a speed of 20-30 km/h, and shift to 4th or 5th gear at 40-50 km/h.

Avoid low gears at high speeds: Using low gears at high speeds over-revives the engine and increases fuel consumption. Change gears according to the speed.

2. Accelerate slowly

Accelerate the bike gradually rather than driving it at high speed. Sudden acceleration consumes more fuel while accelerating at a steady and slow speed saves fuel.

3. Speed ​​and gear combination

Always try to run the engine at its optimum RPM (Revolutions Per Minute). Pay attention to the sound of the engine when changing gears; if the engine is making too much noise, downshift, and if the engine sounds weak, upshift.

4. Regular maintenance

Change the engine oil regularly, and keep the air filter clean. A dirty air filter prevents the proper amount of air from entering the engine, which increases fuel consumption. Apart from this, maintaining the correct tire pressure also improves mileage.

5. Proper use of brakes

Avoid applying brakes unnecessarily frequently. Sudden braking and acceleration both increase fuel consumption. Try to maintain a steady speed in traffic.

6. Practice regular gear shifting

Riding the bike in the same gear for too long can increase fuel consumption. Change gears from time to time according to the speed. Use low gear in traffic and high gear on the open road.

By following these tips, you can get better mileage from your 150cc bike.