Car Brake Fail: If you want to protect yourself and other people sitting in the car when the brake of the car fails, then these methods can prove to be of great use for you.

Car Brake Fail: If the car's brakes fail, instead of panicking, you should try to stop the vehicle wisely and carefully. Here are some important steps that will help ensure your and others' safety:

1. Don't panic and stay calm

First of all, keep your mind calm so that you can take the right decision.

2. Use the HandBrake

Apply the handbrake slowly. Keep in mind that applying the handbrake suddenly can cause the vehicle to slip. Use it slowly and in a controlled manner.

3. Resort to engine braking

Insert the gear into the lower gear. In manual vehicles, take it to second or first gear, and in automatic vehicles, use L (low gear). This will gradually reduce the speed of the car.

4. Move to the side of the road

Slowly move the car to the side of the road. Try to stop the car in a place where there is not much traffic.

5. Find things to increase friction

If possible, move the cart to a place with grass, gravel, or sand. This will help in reducing the speed of the car.

6. Use horns and lights

Blow horns continuously and keep hazard lights on so that nearby drivers become alert.

7. Use a slope or obstacle to stop the car

Try to take the car up a short climb or slope.

8. Follow the rubbing method

If there is no other way to stop, rub it lightly against a wall, railing, or side. But use this method only in an emergency.

Ways to avoid brake failure

Get the brakes serviced regularly.

Check the brake fluid.

If you make a strange sound or vibration, immediately show the mechanic.

With caution and the right information, you can keep yourself and others safe in the event of a brake failure.