Clutch Brake Combination:  By using the right technique and combination to stop the vehicle, you can save petrol and also put less pressure on the braking system.

Clutch Brake Combination:  By using the right technique and combination to stop the vehicle, you can save petrol and also put less pressure on the braking system. To know the right method, it is important to keep the following points in mind:

Braking at Low Speeds:

If the vehicle is moving at a low speed (such as in traffic), first press the clutch and then apply the brake. This will prevent the engine from stalling and the vehicle will gradually stop. 

Braking at High Speeds:

If the vehicle is moving at a high speed, first press the brake to reduce the speed of the vehicle, and then use the clutch. This will keep the engine speed and the speed of the wheels the same, and you will be able to save petrol. This method helps in stopping the vehicle without exerting force.

Use of Engine Braking:

When the road is empty and you want to slow down, shift down a gear (e.g. from 4th to 3rd gear) while using fewer brakes. This is called engine braking and also reduces fuel consumption.

The right combination:

At low speed: First clutch then brake

At high speed: First brake then clutch

This combination helps in reducing fuel consumption by making optimum use of the engine.

You can also increase the mileage of your car by these methods  

There are many ways to increase the mileage of the car, which can help in saving fuel. Some effective measures are given below:

Drive smoothly: Accelerate and brake slowly. Driving at high speeds and braking suddenly increases fuel consumption.

Observe the speed limit: Always drive the car at a moderate speed (40-60 km/h). Driving too fast or too slow consumes more fuel.

Do not keep the engine on more than necessary: ​​Switch off the engine when the vehicle is parked for a long time at a traffic signal or in a jam. This will prevent the waste of fuel.

Drive in the right gear: Driving in a lower gear puts more stress on the engine, which increases fuel consumption. Driving in a higher gear improves mileage.

Keep the tire pressure correct: Maintain the correct air pressure in the car's tires. When there is less air, the car has to work harder, which increases fuel consumption.

Use AC less: Excessive use of AC increases fuel consumption. Keep the AC off when not needed.

Reduce unnecessary weight: Carrying extra stuff in your car adds weight, which makes the engine work harder and consumes more fuel.

Get timely service: It is important to get the vehicle serviced regularly. A clean air filter and a properly tuned engine give better mileage.

By adopting these easy methods, you can increase the mileage of your car and reduce fuel consumption.