Clutch first or brake first? Understand the right combination today to increase the mileage of the vehicle
Clutch and Brake Right Combination: When using brake and clutch while driving, it is very important to follow the correct steps, especially when you want to increase mileage.
Clutch and Brake Right Combination: If you understand the right way to press the clutch and brake in the car, then the mileage of your car can be increased. Even the performance of the car can be improved. Today we are going to explain to you about this combination which is not only helpful in increasing the mileage of the car but also helps in increasing the life of the engine.
To reduce speed: When you want to reduce the speed of the vehicle, first press the brake and then when the speed of the vehicle is low enough (about 10-15 km/hr), then press the clutch. This will not make the engine work too hard, and will save fuel.
To change gears: When you are changing gears, press the clutch fully and then change gears. After changing gears, slowly release the clutch and press the accelerator.
To stop the vehicle: When you want to stop the vehicle completely, first press the brake and when the speed reduces considerably, press the clutch to stop the vehicle.
Do not keep the clutch pressed freely: Keeping the clutch pressed all the time while running can be harmful as it causes the clutch plates to wear out quickly and also has a negative impact on mileage.
If you follow this sequence, not only will your driving be smooth, but you will also get better mileage.
Can the mileage be increased by clutch and brake
Using the clutch and brake properly can help increase mileage. Although they do not have a direct impact on mileage, using them at the right time and in the right manner does not put extra pressure on the engine, which reduces fuel consumption.
Here are some ways you can increase mileage:
Smooth driving: Avoid sudden braking and sudden acceleration. Whenever possible, brake gently and use low gears to control the speed of the vehicle.
Correct use of clutch: Press the clutch only to change gears or when stopping the vehicle. Keeping the clutch pressed while moving can reduce fuel efficiency. If you use the clutch properly, the engine works better, which also increases mileage.
Don't kill the engine: Repeated and incorrect use of the clutch and brake puts extra strain on the engine, reducing its efficiency and increasing fuel consumption.
Avoid unnecessary braking: When possible, try to keep the speed constant depending on the traffic. Frequent braking and accelerating increases fuel consumption.
Switch off the engine: If you are going to stop for a long time, switch off the engine. This will reduce fuel consumption.